CAT SG35
Specifications
- Required Hydraulics: High Flow XPS
- Cutting Wheel Diameter - With Teeth: 21.5 in
- Cutting Depth - Below Ground: 20.5 in
- Cutting Head Extension: 11 in
- Cutting Head Speed at Maximum Flow: 70 Degrees
- Cutting Height - Above Ground: 18.5 in
- Cutting Wheel Width - With Teeth: 3.3 in
- Cutting Width - Full Swing Range: 60 in
- Drive Method: Gerotor Motor - Direct
- Drive Shaft Torque at Maximum Pressure: 345.9 lb/ft
- Motor Displacement: 6.1 in^3
- Optimal Hydraulic Pressure: 207-310 bar (3000-4500 psi)
- Overall Height: 32 in
- Overall Length: 68.4 in
- Overall Width : 46.3 in
- Optimal Hydraulic Flow: 95--125 L/min (25--33gpm)
- Weight: 881.8 lb